LED Sign Modules and Power Supplies in Colorado
Colorado carries a high priority in the TMT LEDs 48-state market analysis, with sign demand concentrated in outdoor recreation, hospitality, breweries and restaurants and healthcare. Below: the verified electricity benchmark, what it means for sign economics, TMT product guidance and the metro guides.
Metro Guides in Colorado
The Colorado benchmark applies everywhere; these metro guides explain what differs on the ground.
Reading the Colorado Benchmark
Colorado's commercial average came in at 12.92 cents per kilowatt-hour in the April 2026 preliminary EIA data, about 0.59 cents below the u.s. commercial average; nationally the figure was 13.51 cents. State averages set the Colorado planning baseline, and individual accounts land above or below it; final numbers come from a real tariff.
Annual Value, Benchmarked
A 900 W demand reduction over a 12 hour operating day removes 3,942 kWh annually, about $509 at the CO average.
Five Year View
Held for five years without escalation, that is about $2,545 for a CO sign before any maintenance savings.
Scope a CO Sign Project
Calculate module quantity, total wattage, power-supply loading and estimated operating cost for your sign.
Launch the CalculatorPlanning example only. Assumes a 900-watt demand reduction, 12 operating hours per day and 365 operating days per year. Excludes demand charges, taxes, delivery charges, labor, maintenance, rate escalation and incentives.
Where Colorado Sign Demand Lives
Colorado sign demand concentrates in outdoor recreation, hospitality, breweries and restaurants and healthcare. High value formats include cold-weather exterior signs, resort and hotel identity, channel letters, cabinet signs, monument signs. Market priority: High.
Outdoor recreation
In Colorado, this sector trades on visibility, which makes its signage a working asset.
Hospitality
Colorado hospitality identity works dusk to dawn, compounding every efficiency gain.
Breweries and restaurants
Franchise refresh cycles across Colorado turn illuminated signage faster than most categories.
Healthcare
Hospital campuses across Colorado reward conservative loading and redundancy in sign power.
Retail
Storefront letters and center pylons across Colorado turn over with tenants, keeping shops busy.
Logistics
Colorado logistics portfolios repeat one design across many buildings, so standardized packages pay.
Applying TMT Fundamentals in Colorado
Address temperature swings, snow/moisture exposure, surge protection, cabinet uniformity and long-run voltage drop. Nothing about lumens or load limits is regional, but the Colorado market puts its own weight on the tradeoffs.
Modules
Rank candidates by lumens per watt and beam behavior, then let stroke width, letter depth and face diffusion set the count for CO work. Wide beams cover cabinet faces; compact optics serve narrow strokes. Documentation-cited details: LED Signage Modules.
Supply Selection
The supply decision for CO installs is voltage, circuits and documented capacity, in that order, with service access ahead of shortest wire path. Product selection must be based on the specific power supply's listed environment, enclosure rating, electrical classification, installation method and applicable code requirements. See the Power Supply Buyers Guide.
Sources, Dates and Review Policy
Exact sources: U.S. EIA, Electric Power Monthly, Table 5.6.A, average price of electricity to ultimate customers by state, April 2026 preliminary (EIA table 5.6.A). Sign manufacturing establishment and employment figures will publish from U.S. Census Bureau, County Business Patterns 2023, NAICS 339950 (CBP 2023 datasets) once the verified pull is loaded. Industry and metro characterizations derive from the TMT LEDs 48-state market analysis, cross-checkable against BEA regional accounts (GDP by county and metro). Product statements cite TMT LEDs USA documentation. Standards: Source Policy.
Rate Data: Period and Review
Period: April 2026, preliminary. Released: June 25, 2026. Reviewed for this page: July 12, 2026. Next review: on the following EIA Electric Power Monthly release; this page updates as new state averages publish. Status: current.
Common Colorado Questions
What electricity benchmark should Colorado sign projects use?
Colorado's commercial average came in at 12.92 cents per kilowatt-hour in the April 2026 preliminary EIA data, about 0.59 cents below the u.s. commercial average; nationally the figure was 13.51 cents. It is a planning benchmark rather than a quote; use the tariff from an actual bill in the LED ROI Calculator when the numbers matter.
What is the standardized savings example worth in Colorado?
The standardized case removes 900 watts of demand for 12 hours a day, 3,942 kWh a year, worth about $509 annually and $2,545 across five years at the Colorado benchmark, under the planning disclaimer shown beside those figures above.
Where does Colorado sign work concentrate?
Demand concentrates in outdoor recreation, hospitality, breweries and restaurants and healthcare, with high value formats including cold-weather exterior signs, resort and hotel identity, channel letters, cabinet signs, monument signs. The metro guides above carry the market-by-market detail.
How do Colorado conditions change component selection?
High elevation, strong UV, snow and wide temperature swings require dependable low-temperature and outdoor performance. These are design considerations, not blanket product claims; the suitability rule stated with the power supply guidance on this page governs selection, and local electrical code governs final installations.
Join the Conversation and See What Is Next
LED Professionals Forum
Trade layout questions and retrofit results from Colorado projects with sign professionals nationwide in the upcoming LED Professionals Forum at LED Knowledge Center.
New From TMT: Linera Series
The upcoming Linera Series brings border and contour lighting to the lineup; see the preview at TMT Linera Border Lighting Profile.
Take Colorado Numbers Further
Your sign, your rate, your hours; the output is a plan, not an example.
Model Your SignLearn more by visiting LED Knowledge Center for Sign Makers, covering Modules, Power Supplies and ROI. Questions about a Colorado project? Reach the team at Contact Us at LED Knowledge Center.
← California · Florida → · All Markets · State Metrics on the News page